Dreampad pillow: how to setup and use

Setting up your Dreampad is simple and only takes a few minutes.

Step 1: Choose your connection method

You can connect your Dreampad in two ways:

• Bluetooth connection using the included Bluetooth receiver
• Direct wired connection using the included adapter

Step 2: Connect your device

Bluetooth setup

1. Charge the included Bluetooth receiver
2. Turn on Bluetooth on your phone or tablet
3. Press and hold the Bluetooth receiver power button until the blue light flashes
4. Select “Dreampad” from your device’s Bluetooth settings
5. Once connected, the light will remain solid blue

Direct connection

If you prefer not to use Bluetooth:

1. Connect the Dreampad cable to the included adapter
2. Plug the adapter directly into your phone or device
3. Newer iPhones may require a Lightning adapter

Step 3: Choose your audio

You can use:

• The Dreampad Sleep App
• Spotify
• Apple Music
• YouTube
• Podcasts
• Audiobooks
• Meditation apps
• Nature sounds

Step 4: Adjust the volume

Start with a low “whisper-level” volume and adjust until comfortable. Side sleepers typically require a lower volume than back sleepers.